ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 76 / 432

Chapter 7 Status and ZON
GS1920v2 Series User’s Guide
76
Model This shows the model name of the neighbor device. This field will show “
-
” for non-Zyxel
devices.
System Name This shows the system name of the neighbor device.
Location This shows the geographic location of the neighbor device.
Firmware This shows the firmware version of the neighbor device. This field will show “
-
” for non-Zyxel
devices.
IP This shows the IP address of the neighbor device. The IP address is a
hype r link
that you
can click to log into and manage the neighbor device through its web configurator. This
field will show “
-
” for non-Zyxel devices.
MAC This shows the MAC address of the neighbor device. This field will show “
-
” for non-Zyxel
devices.
PWR Cycle Click the
C yc le
button to turn OFF the power of the neighbor device and turn it back ON
again. A count down button (from 5 to 0) starts.
Note:
• The Switch must support power sourcing (PSE) or the network device is a powered
device (PD).
• If multiple neighbor devices use the same port, the
C yc le
button is displayed only on
the first device, others will show “
-
” instead.
Reset to Default Click the
Re se t
button to reset the neighbor device to its factory default settings. A
warning message “
Are yo u sure yo u wa nt to lo a d fa c to ry de fa ult?
” appears prompting
you to confirm the action. After confirming the action a count down button (from 5 to 0)
starts.
Note:
• The Switch must support power sourcing (PSE) or the network device is a powered
device (PD).
• If multiple neighbor devices use the same port, the
Re se t
button is not available and
will show “
-
” instead.
• You can only reset Zyxel products.
Table 12 Status > Neighbor
LABEL DESC RIPTIO N