ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 321 / 432

Chapter 36 Differentiated Services
GS1920v2 Series User’s Guide
321
Fig ure 229
IP Application > DiffServ
The following table describes the labels in this screen.
36.3 DSC P Se tting s
You can configure the DSCP to IEEE 802.1p mapping to allow the Switch to prioritize all traffic based on
the incoming DSCP value according to the DiffServ to IEEE 802.1p mapping table.
Table 149 IP Application > DiffServ
LABEL DESC RIPTIO N
Active Select this option to enable DiffServ on the Switch.
Port This field displays the index number of a port on the switch.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set the
common settings and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Active Select
Ac tive
to enable Diffserv on the port.
Apply Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Sa ve
link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel Click
C a nc e l
to begin configuring this screen afresh.