ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 166 / 432

Chapter 17 Link Aggregation
GS1920v2 Series User’s Guide
166
17.3.1 Link Ag g re g a tio n C o ntro l Pro to c o l
Click
Adva nc e d Applic a tio n
>
Link Ag g re g a tio n
>
Link Ag g re g a tio n Se tting
>
LAC P
to display the screen
shown next. See Dynamic Link Aggregation on page 162 for more information on dynamic link
aggregation.
Criteria Select the outgoing traffic distribution type. Packets from the same source and/or to the same
destination are sent over the same link within the trunk. By default, the Switch uses the
src - dst- m a c
distribution type. If the Switch is behind a router, the packet’s destination or source MAC address
will be changed. In this case, set the Switch to distribute traffic based on its IP address to make
sure port trunking can work properly.
Select
src - m a c
to distribute traffic based on the packet’s source MAC address.
Select
dst- m a c
to distribute traffic based on the packet’s destination MAC address.
Select
src - dst- m a c
to distribute traffic based on a combination of the packet’s source and
destination MAC addresses.
Select
src - ip
to distribute traffic based on the packet’s source IP address.
Select
dst- ip
to distribute traffic based on the packet’s destination IP address.
Select
src - dst- ip
to distribute traffic based on a combination of the packet’s source and
destination IP addresses.
Port This field displays the port number.
Group Select the trunk group to which a port belongs.
Note: When you enable the port security feature on the Switch and configure port
security settings for a port, you cannot include the port in an active trunk group.
Apply Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Sa ve
link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel Click
C a nc e l
to begin configuring this screen afresh.
Table 64 Advanced Application > Link Aggregation > Link Aggregation Setting (continued)
LABEL DESC RIPTIO N