ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 30 / 432

Chapter 2 Hardware Installation and Connection
GS1920v2 Series User’s Guide
30
2.3.2 Pre c a utio ns
• Make sure to place the Switch horizontally under a smooth level surface.
• Make sure the table is sturdy enough for desk mounting.
• Make sure there is enough table thickness to drill screws.
• Make sure there is sufficient space for port connections.
2.3.3 Atta c hing the Mo unting Bra c ke ts to the Switc h
1
Position a mounting bracket on one side of the Switch, lining up the four screw holes on the bracket with
the screw holes on the side of the Switch.
Fig ure 6
Attaching the Mounting Brackets
2
Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting bracket holes into
the Switch.
3
Repeat steps 1 and 2 to install the second mounting bracket on the other side of the Switch.
4
You may now mount the Switch under a table. Proceed to the next section.
2.3.4 Mo unting the Switc h unde r a Ta b le
1
Determine where you want to mount the Switch under a table. See Section 2.3 on page 29 to choose a
suitable location.
2
Position the Switch in place and mark the places for drilling with the attached brackets.
3
Drill holes at the marked places under the table.
4
Line up the two screw holes on the bracket with the screw holes under the table.