ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 347 / 432

Chapter 39 Maintenance
GS1920v2 Series User’s Guide
347
WARNING ! Be sure to uplo a d the c o rre c t m o de l firm wa re a s uplo a ding
the wro ng m o de l firm wa re m a y da m a g e yo ur de vic e .
39.7.3 FTP C o m m a nd Line Pro c e dure
1
Launch the FTP client on your computer.
2
Enter
open
, followed by a space and the IP address of your Switch.
3
Press
[ENTER]
when prompted for a username.
4
Enter your password as requested (the default is “1234”).
5
Enter
bin
to set transfer mode to binary.
6
Use
put
to transfer files from the computer to the Switch, for example,
put firmware.bin ras
transfers
the firmware on your computer (firmware.bin) to the Switch and renames it to “ras”. Similarly,
put
config.cfg config
transfers the configuration file on your computer (config.cfg) to the Switch and
renames it to “config”. Likewise
get config config.cfg
transfers the configuration file on the Switch
to your computer and renames it to “config.cfg”. See Table 167 on page 346 for more information on
filename conventions.
7
Enter
quit
to exit the ftp prompt.
39.7.4 G UI- b a se d FTP C lie nts
The following table describes some of the commands that you may see in GUI-based FTP clients.
39.7.5 FTP Re stric tio ns
FTP will not work when:
• FTP service is disabled in the
Se rvic e Ac c e ss C o ntro l
screen.
• The IP address(es) in the
Re m o te Ma na g e m e nt
screen does not match the client IP address. If it does
not match, the Switch will disconnect the FTP session immediately.
General Commands for GUI-based FTP Clients
C O MMAND DESC RIPTIO N
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to the server for
anonymous access. Anonymous logins will work only if your ISP or service administrator
has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode. Configuration and
firmware files should be transferred in binary mode.
Initial Remote Directory Specify the default remote directory (path).
Initial Local Directory Specify the default local directory (path).