ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 157 / 432

Chapter 14 Bandwidth Control
GS1920v2 Series User’s Guide
157
The following table describes the related labels in this screen.
Table 58 Advanced Application > Bandwidth Control
LABEL DESC RIPTIO N
Active Select this check box to enable bandwidth control on the Switch.
Port This field displays the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set the
common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this check box to activate ingress rate limits on this port.
Ingress Rate Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow
on a port.
Note: Ingress rate bandwidth control applies to layer 2 traffic only.
Active Select this check box to activate egress rate limits on this port.
Egress Rate Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the out-going traffic
flow on a port.
Apply Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the
Sa ve
link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel Click
C a nc e l
to reset the fields.