ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 110 / 432

Chapter 9 VLAN
GS1920v2 Series User’s Guide
110
Fig ure 84
Basic Setting > Switch Setup > Select VLAN Type
Sta tic VLAN
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the specified
VID.
9.2 VLAN Sta tus
Use this screen to view and search all VLAN groups. Click
Adva nc e d Applic a tio n
>
VLAN
from the
navigation panel to display the
VLAN Sta tus
screen as shown next.
Fig ure 85
Advanced Application > VLAN: VLAN Status
The following table describes the labels in this screen.
Table 35 Advanced Application > VLAN: VLAN Status
LABEL DESC RIPTIO N
VLAN Search by
VID Enter an existing VLAN ID number(s) (separated by a comma) and click
Se a rc h
to display only
the specified VLAN(s) in the list below.
Leave this field blank and click
Se a rc h
to display all VLANs configured on the Switch.
The Number of
VLAN This is the number of VLANs configured on the Switch.
The Number of
Search Results This is the number of VLANs that match the searching criteria and display in the list below.
This field displays only when you use the
Se a rc h
button to look for certain VLANs.