ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 378 / 432

GS1920v2 Series User’s Guide
378
44.4 Te c hnic a l Re fe re nc e
This section provides technical background information on the topics discussed in this chapter.
44.4.1 C luste r Me m b e r Switc h Ma na g e m e nt
Go to the
C luste ring Ma na g e m e nt Sta tus
screen of the cluster manager switch and then select an
Inde x
hyperlink from the list of members to go to that cluster member switch's web configurator home page.
This cluster member web configurator home page and the home page that you'd see if you accessed it
directly are different.
Cancel Click
C a nc e l
to begin configuring this screen afresh.
Clustering
Candidate The following fields relate to the switches that are potential cluster members.
List A list of suitable candidates found by auto-discovery is shown here. The switches must be
directly connected. Directly connected switches that are set to be cluster managers will
not be visible in the
C luste ring C a ndida te
list. Switches that are not in the same
management VLAN group will not be visible in the
C luste ring C a ndida te
list.
Password Each cluster member’s password is its web configurator password. Select a member in the
C luste ring C a ndida te
list and then enter its web configurator password. If that switch
administrator changes the web configurator password afterwards, then it cannot be
managed from the
C luste r Ma na g e r
. Its
Sta tus
is displayed as
Erro r
in the
C luste r
Ma na g e m e nt Sta tus
screen.
If multiple devices have the same password then hold [SHIFT] and click those switches to
select them. Then enter their common web configurator password.
Add Click
Add
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Sa ve
link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click
C a nc e l
to begin configuring this screen afresh.
Refresh Click
Re fre sh
to perform auto-discovery again to list potential cluster members.
The next summary table shows the information for the clustering members configured.
Index This is the index number of a cluster member switch.
MacAddr This is the cluster member switch’s hardware MAC address.
Name This is the cluster member switch’s
Syste m Na m e
.
Model This is the cluster member switch’s model name.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Remove Click the
Re m o ve
button to remove the selected cluster member switch(es) from the
cluster.
Cancel Click
C a nc e l
to begin configuring this screen afresh.
Table 188 Management > Cluster Management > Configuration (continued)
LABEL DESC RIPTIO N