ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 389 / 432

GS1920v2 Series User’s Guide
389
The following table describes the labels in this screen.
Table 193 Management > Configure Clone
LABEL DESC RIPTIO N
Source/
Destination
Port
Enter the source port under the
So urc e
label. This port’s attributes are copied.
Enter the destination port or ports under the
De stina tio n
label. These are the ports which are going
to have the same attributes as the source port. You can enter individual ports separated by a
comma or a range of ports by using a dash.
Example:
2, 4, 6
indicates that ports 2, 4 and 6 are the destination ports.
2- 6
indicates that ports 2 through 6 are the destination ports.
Basic Setting Select which port settings (you configured in the
Ba sic Se tting
menus) should be copied to the
destination port(s).
Advanced
Application Select which port settings (you configured in the
Adva nc e d Applic a tio n
menus) should be copied
to the destination ports.
Apply Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Sa ve
link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel Click
C a nc e l
to begin configuring this screen afresh.