ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 85 / 432

Chapter 8 Basic Setting
GS1920v2 Series User’s Guide
85
8.7 Po rt Se tup
Use this screen to configure Switch port settings. Click
Ba sic Se tting
>
Po rt Se tup
in the navigation panel
to display the configuration screen.
Management IP Addresses
You can create up to 64 IP addresses, which are used to access and manage the Switch from the ports belonging
to the pre-defined VLAN(s). You must configure a VLAN first.
IP Address Enter the IP address for managing the Switch by the members of the VLAN specified in the
VID
field below.
IP Subnet Mask Enter the IP subnet mask in dotted decimal notation.
VID Type the VLAN group identification number.
Default Gateway Enter the IP address of the default outgoing gateway in dotted decimal notation.
Add Click
Add
to insert the entry to the summary table below and save your changes to the
Switch’s run-time memory. The Switch loses these changes if it is turned off or loses power, so
use the
Sa ve
link on the top navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Cancel Click
C a nc e l
to reset the fields to your previous configuration.
Index This field displays the index number of the rule. Click an index number to edit the rule.
IP Address This field displays the IP address.
IP Subnet Mask This field displays the subnet mask.
VID This field displays the ID number of the VLAN group.
Default Gateway This field displays the IP address of the default gateway.
Delete Check the management IP addresses that you want to remove in the
De le te
column, then
click the
De le te
button.
Cancel Click
C a nc e l
to clear the selected check boxes in the
De le te
column.
Table 16 Basic Setting > IP Setup (continued)
LABEL DESC RIPTIO N