ZyXEL Communications GS1920-48HPv2, Руководство пользователя

Страница: 221 / 432

Chapter 24 Multicast
GS1920v2 Series User’s Guide
221
Fig ure 158
Advanced Application > Multicast > MVR > Group Configuration
The following table describes the labels in this screen.
Table 92 Advanced Application > Multicast > MVR > Group Configuration
LABEL DESC RIPTIO N
Multicast VLAN ID Select a multicast VLAN ID (that you configured in the
MVR
screen) from the drop-down list
box.
Group Name Enter a descriptive name for identification purposes.
Start Address Enter the starting IP multicast address of the multicast group in dotted decimal notation.
Refer to IP Multicast Addresses on page 201 for more information on IP multicast addresses.
End Address Enter the ending IP multicast address of the multicast group in dotted decimal notation.
Enter the same IP address as the
Sta rt Addre ss
field if you want to configure only one IP
address for a multicast group.
Refer to IP Multicast Addresses on page 201 for more information on IP multicast addresses.
Add Click this to create a new entry.
This saves your changes to the Switch’s run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the
Sa ve
link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel Click
C a nc e l
to begin configuring this screen afresh.
MVLAN This field displays the multicast VLAN ID.
Group Name This field displays the descriptive name for this setting.
Start Address This field displays the starting IP address of the multicast group.
End Address This field displays the ending IP address of the multicast group.
To delete the profile(s) and all the accompanying rules, select the profile(s) that you want to
remove, then click the
De le te
button. You can select the check box in the table heading row
to select all profiles.
To delete a rule(s) from a profile, select the rule(s) that you want to remove , then click the
De le te
button.