Xerox Stacker 1000 Скачать руководство пользователя страница 88

Страница: 88 / 396

b) Remove any residual moisture with a dry, lint-free cloth.

4. Return lever 6b to its original position.

5. Use a damp, water-moistened (not wet), lint-free cloth to clean the paper path only

in the green lever jam clearance areas as shown in the illustration.

a) Open each area and clean the surfaces of the green-handle areas.

b) Remove any residual moisture with a dry, lint-free cloth.

6. Return lever 6c to its original position.

7. Return lever 6d to its original position.

8. Grasp handle 6 and gently push in the exit drawer assembly until it stops.

9. Rotate handle 6 in the direction of the arrow to lock the exit drawer assembly in

place.

10. Close the left front door (print engine right side).

Xerox

Color 800/1000 Press

9-12

User Guide

Maintenance

Содержание Stacker 1000













































































































































































































































































































































































































Результаты поиска

Содержание Stacker 1000

Отзывы:

Xerox Stacker 1000, Руководство пользователя, Страница: 88 / 396

Результаты поиска

Содержание Stacker 1000

Отзывы: