manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 323 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 323

Specification

Item

Maximum number of sheets:

Booklet Creation/Single
Fold

• Fold and Staple: 25 sheets
• Fold only: 5 sheets

When using Xerox 20 lb./75 gsm paper, only 14 sheets can be stapled
if adding a cover.

Paper size:

• Maximum: A3, 13 x 18 in.

• Minimum: A4 SEF, 8.5 x 11 in. SEF

Note

When using light-weight stocks, media jams may occur with Booklet
Creation, Single Fold, and stapling for output that is 25 sheets or
more. If media jams do occur, it is recommended that a different
media type is selected for the job.

Paper type: Fold only or Fold and Staple: 55-350gsm uncoated,
106-300gsm coated

Paper Weights/Booklet Capacity:

• 64-80 gsm, Uncoated: 25 sheets

• 81-90 gsm, Uncoated: 20 sheets
• 91-105 gsm, Uncoated: 10 sheets

• 106-128 gsm, Uncoated: 10 sheets, Coated: 10 sheets

• 129-150 gsm, Uncoated: 10 sheets, Coated: 10 sheets

• 151-176 gsm, Uncoated: 10 sheets, Coated: 10 sheets

• 177-220 gsm, Uncoated: 5 sheets, Coated: 5 sheets

• 221-256gsm, 4 sheets max. coated or uncoated

• 257-350gsm, 3 sheets max, coated or uncoated

Note

Non-stapled fold sets are limited to 5 sheets of paper.

Folding

Paper size:

Tray 8/T1 (Post-Process
Inserter; also called
Interposer)

• Maximum: A3/11 x 17 in.

• Minimum: B5, Executive (7.25 x 10.5 in.)

The machine does not print on paper loaded in Tray 8/T1.

Capacity: 200 sheets when using Xerox 20 lb./75 gsm paper.

Paper type: 64-220 gsm

17-45

Xerox

®

 Color 800/1000 Press

User Guide

Standard/Booklet Maker Finisher

(continued)

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов