Xerox Stacker 1000 Скачать руководство пользователя страница 192

Страница: 192 / 396

Unloading the Stacker Tray

1. Press the Unload button on the HCS control panel.

Wait until the Unload indicator lights and then open the HCS front door.

2. Open the front door after the Unload indicator lights.

3. Position the securing bar on top of the stacked paper.

4. Pull the Stacker Cart straight out of the HCS.

5. Remove the securing bar.

6. Remove the paper from the Stacker Tray.

7. Push the empty Stacker Cart straight into the HCS.

8. Position the securing bar on the fixed area inside the HCS.

9. Close the front door; the tray will rise to the operate position.

Xerox

Color 800/1000 Press

15-4

User Guide

High Capacity Stacker (HCS)

Содержание Stacker 1000













































































































































































































































































































































































































Результаты поиска

Содержание Stacker 1000

Отзывы:

Xerox Stacker 1000, Руководство пользователя, Страница: 192 / 396

Результаты поиска

Содержание Stacker 1000

Отзывы: