Xerox Stacker 1000 Скачать руководство пользователя страница 362

Страница: 362 / 396

4. Return the levers 3b and 3d to their original positions.

5. Close the Right Cover on the finisher.

Note

A message will display and the machine will not operate if the right cover is open
even slightly.

Paper jams at lever 3e and knob 3c

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.

1. Make sure that the machine has stopped printing.

2. Open the Right Cover on the finisher.

Xerox

Color 800/1000 Press

19-20

User Guide

Standard Finisher Plus

Содержание Stacker 1000













































































































































































































































































































































































































Результаты поиска

Содержание Stacker 1000

Отзывы:

Xerox Stacker 1000, Руководство пользователя, Страница: 362 / 396

Результаты поиска

Содержание Stacker 1000

Отзывы: