manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 105 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 105

General problems

If the machine has a loss of power and you cannot access the Machine Details screen
to get the serial number, open the two main front doors. The serial number label is in
the center of the bottom frame of the machine. If the problem persists after following
all the instructions, contact your Xerox representative.

Note

If your print server indicates that the machine has a fault and the UI does not readily
display a message, select  System  > Machine Details, then select the Error Log tab to
display the fault history.

Suggested solutions

Problem

The machine does not
power on

• Ensure the power cord is plugged into the receptacle correctly.

• Ensure the power switch inside the front door is set to the ON

position.

• Check the GFI circuit breakers.

• If the power in your location is working properly, you have tried

the suggested solutions, and the machine does not power on,
contact the Customer Support Center for assistance.

Open the two main front doors. The serial number is located on
the frame area above Trays 1 and 2 on the print engine left side.

There is no power to the
machine and you cannot
access the Machine Details
screen to get the machine
serial number.

The machine does not
successfully complete a
print job.

• Is your machine connected to the network as a printer? Try

printing a test page from your workstation to the machine to
verify that the machine is connected on the network.

• Verify that the power cable is connected to the machine and

to a suitable power socket.

• Verify that the network cables are attached securely to the

machine and seated properly.

• Clear out the print job from the print queue and re-send print

job.

• Power Off/On the machine to restart it.

• Your machine may not be configured on the network. Contact

your System Administrator to connect the machine to the
network.

10-3

Xerox

®

 Color 800/1000 Press

User Guide

Problem solving

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов