manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 180 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 180

Control panel

The Control Panel consists of the following:

1. Auto Curl button: This button selects the Auto Decurl function.

2. Manual Curl Up button: This button selects the three values of manual up curl.

3. Manual Curl Down button: This button selects the three values of manual down curl.

4. Curl Up/Down indicators: These indicate the amount of manual curl (up or down)

that is selected.

5. Auto Curl indicator: This indicates that the Auto Curl Mode is selected.

If you want to quickly and at the point-of-need adjust the paper curl on the printed
output, you may use the Interface Module’s Manual Curl Up or Down buttons. If the
printed output contains too much curl after using these buttons, refer to the System
Administration Guide for information on adjusting the paper curl by using the Paper
Curl Correction feature (Advanced Stock Setup). The Interface Module paper curl buttons
are discussed in more detail later in this section.

Xerox

®

 Color 800/1000 Press

14-2

User Guide

Interface Module

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов