manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 216 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 216

4. From the printer’s UI, enter the correct paper information, including size, type, and

weight from the Tray Properties window.

5. Select OK to save the information and close the Tray Properties window.

Removing books from the binder

1. The book stacker tray LED lights indicating that a finished book was delivered to book

stacker tray.

2. Press the button to open the book stacker tray.

3. Remove the book and close the tray.

Submitting a job to the binder

These exercises require the PDF files for the User Guide and System Administration
Guide. If you do not have an electronic copy of these PDFs, download them from

www.xerox.com

.

The exercises instruct you on how to print one of the customer documentation guides
(User Guide or System Administration Guide).

Printing from your computer to the binder

1. From your computer open one of the PDFs files in Adobe Acrobat Reader.

2. Select  File  > Print.

3. Select the desired printer.

4. Select the printer’s Hold queue.

5. Select OK to send the job to the printer.

The job is sent to and remain in the printer’s Hold queue until released for printing.

6. Go the print server that is connected to the printer.

7. To print the job, go the correct print server procedure in this section and follow the

instructions to setup and release the job for printing to the binder.

Xerox

®

 Color 800/1000 Press

16-12

User Guide

Perfect Binder

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов