manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 226 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 226

2. At the system’s UI, confirm/change the tray properties for the preprinted covers.

Tray appears on the system’s UI as T1.

3. For the book block pages, load the desired stock into one of the printer’s trays and

confirm on the settings on the system’s UI.

4. Send the job containing the book block pages to the print server’s Hold queue.

5. From the print server, select the job in the Hold queue and then select Job Properties.

The Job Properties window opens.

6. Select Quick Access and set Copies to the number of copies you want to print and

bind.

7. If printing on both sides of the book block pages, for Duplex, select Top - Top or Top

- Bottom.

8. Select the Layout tab from the menu bar.

9. Select the Booklet radio button.

10. In the Booklet Type area, select 1-up Perfect.

A window opens to set Perfect Binder parameters.

11. To the left of 1-up Perfect, select the location of the binding on the book:

• Left Binding: this is the default and commonly used for books printed in the west.

• Top: this provides a calendar-type binding.

• Right Binding: This is used for books published in Asian or Middle-Eastern

languages.

12. In the Trim area, select the trim amount; options include:

• Use Specified Values: Uses the trim control arrows to manually set trim amounts

for the three sides of the book that are not bound.

• None: No trimming occurs for the job, just binding.

• Minimum Trim: the print server automatically applies the minimum trim possible,

which is less than .25 in./6.35 mm.

• Calculate Trim From Finish Size: This sets the width and height of the finished

size of the bound book, after trimming is complete.

Use the Trim Angles button only when the corners of a bound book are not 90º and
therefore the book is not square. If you have already bound some books and know
that one of the sides of the bound book is not being trimmed straight, you can adjust
the Top, Bottom and Fore edge angle.

13. Select the Body Paper Size for the paper that you loaded in the printer tray for the

book block.

14. Select the Cover Paper Size for the paper that you loaded in the printer tray for the

covers.

15. In the Cover Content area of the window, for Content input, select Pre-Printed.

Xerox

®

 Color 800/1000 Press

16-22

User Guide

Perfect Binder

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов