manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 18 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 18

Productivity

With the usage of the clear dry ink module, machine productivity is maintained across
all supported media, expanding the realm of endless capabilities including:

• Maintains full rated speed of 80/100 prints per minute (ppm) in five-color mode

• Supports both text and images

Full flood

Full flood varnish provides a uniform, glossy finish on the printed output when it is used
with high-end applications. The full flood option provides full page coverage as a clear,
glossy finish (varnish) which enhances the overall appearance within an application or
on a single sheet.

Spot

Using the spot option within a supported application allows the user to indicate a specific
area, or multiple areas where a clear dry ink will be applied to the printed output. This
is done in order to accent or highlight the desired area. Spot varnish can be used to:

• “Varnish” (apply a glossy finish to) specific areas of a print job

• Create artistic effects and highlights on a print job

• Enhance the appearance of metallic items with key colors such as silver, gold, or

copper

• Enhance pastel colors with a pearly luster affect

• Highlight images for visual variety to make them lift off the page (a three-dimensional

affect)

• Draw attention to headline text

• Highlight photos, logos, or other image areas

• Highlight watermarks

Xerox

®

 Color 800/1000 Press

1-6

User Guide

Product overview

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов