Xerox Stacker 1000, Руководство пользователя, Страница: 228 / 396

11. In the Trim area, select the trim amount; options include:
• Use Specified Values: Uses the trim control arrows to manually set trim amounts
for the three sides of the book that are not bound.
• None: No trimming occurs for the job, just binding.
• Minimum Trim: the print server automatically applies the minimum trim possible,
which is less than .25 in./6.35 mm.
• Calculate Trim From Finish Size: This sets the width and height of the finished
size of the bound book, after trimming is complete.
Use the Trim Angles button only when the corners of a bound book are not 90º and
therefore the book is not square. If you have already bound some books and know
that one of the sides of the bound book is not being trimmed straight, you can adjust
the Top, Bottom and Fore edge angle.
12. Select the Body Paper Size for the paper that you loaded in the printer tray for the
book block.
13. Select the Cover Paper Size for the paper that you loaded in the printer tray for the
covers.
14. In the Cover Content area of the window, for Content input, select one of the
following:
• Front & Back Separately: Select if the front cover images are on the first page
and the back cover images are on the last page of the file. If you select this setting,
also set both the Front Cover (Page 1) and Back Cover (Page N) menus to one of
the following: Print on Outside, Print on Inside, Print on Both Sides, or Do not Print.
Note
When you print on both sides of the front cover, Page 2 is placed on the inside of
the cover, and when you print on both sides of the back cover, the next-to-last-page
(Page N-1) is placed on the inside.
• Front & Back Together: Select if the first page of the file if a large sheet that
contains both the front cover and the back cover. The binder wraps this cover
sheet around the book block. If you select this setting, also set the Content menu
to Print on the outside of the cover (if there are images on just the front of the
cover page in the file), or Print on Both sides of the cover (if there are images on
the front and back of the cover page in the file).
• Pre-Printed: Select if you printed the cover separately and you do not want the
print server to create a cover from the file.
15. For Spine Width, use the arrows to set the size of the spine.
For Spine Content, select Document Page if you want to print on the spine and the
image is located in the file.
Xerox
®
Color 800/1000 Press
16-24
User Guide
Perfect Binder