Xerox Stacker 1000 Скачать руководство пользователя страница 365

Страница: 365 / 396

Paper jams at lever 4b and knob 3a

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.

1. Make sure that the machine has stopped printing.

2. Open the Right Cover on the finisher.

3. Move the lever 4b and turn the knob 3a; remove the jammed paper.

Note

If paper is torn, check inside the machine and remove it.

4. Return the lever 4b its original position.

19-23

Xerox

Color 800/1000 Press

User Guide

Standard Finisher Plus

Содержание Stacker 1000













































































































































































































































































































































































































Результаты поиска

Содержание Stacker 1000

Отзывы:

Xerox Stacker 1000, Руководство пользователя, Страница: 365 / 396

Результаты поиска

Содержание Stacker 1000

Отзывы: