Xerox Stacker 1000 Скачать руководство пользователя страница 203

Страница: 203 / 396

Recommended solution

Possible cause

Fault code

HCS falsely detects that the
Paper Unload button is
pressed.

049 973

• Open the HCS front door.

• Remove any paper from stacker cart.

• Close front door

• If necessary, power Off/On the

machine

• If the problem still exists, contact the

Customer Support Center.

Specifications

Paper guidelines

• Stacker Tray will accept 55-350 gsm (either coated or uncoated stock) with the

possibility of degraded stock quality and increased jam rate for stocks that are heavier
than 300 gsm.

• Transparencies may be run to either the Top Tray or the Stack Tray. Stack height

should be limited to 100 transparencies.

• Coated paper lighter than 100 gsm may not run as reliably as coated paper heavier

than 100 gsm.

• Non-standard papers longer than 305 mm (12 in.) in the feed direction require 210

mm (8.3 in.) minimum measurement across the feed direction.

• Non-standard papers shorter than 254 mm (10 in.) in the cross-feed direction require

330 mm (13 in.) minimum measurement in the feed direction.

15-15

Xerox

Color 800/1000 Press

User Guide

High Capacity Stacker (HCS)

(continued)

Содержание Stacker 1000













































































































































































































































































































































































































Результаты поиска

Содержание Stacker 1000

Отзывы:

Xerox Stacker 1000, Руководство пользователя, Страница: 203 / 396

Результаты поиска

Содержание Stacker 1000

Отзывы: