manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 198 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 198

2. Lift the green handle and/or rotate the green knob and remove all paper in the

entrance area.

3. Lift the green handle and/or rotate the green knob and remove all paper in the

entrance area.

4. Close the green handle(s).

5. Close the HCS Front Cover.

6. If the UI indicates there is a jam in the print engine, follow the instructions on the

screen to remove any paper in the area indicates.

7. Follow the instructions displayed on the UI to resume printing.

Hints and tips for using the HCS

Refer to the following hints and tips when using the HCS:

1. Check the paper in the Stock Tray for curl.

a) If no curl is present and if the output is acceptable (meets customer satisfaction),

you are finished.

b) If no curl is present and the if the output is NOT acceptable, call for service.
c) If curl IS present, continue to the next step.

2. Check the paper in the Stock Tray for curl.
3. Adjust the paper curl by using the decurler controls on the top of the Interface Module.
4. If the output has not improved, adjust the paper curl again.
5. If the output still has not improved, call the Customer Support Center.

Xerox

®

 Color 800/1000 Press

15-10

User Guide

High Capacity Stacker (HCS)

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов