Xerox Stacker 1000 Скачать руководство пользователя страница 121

Страница: 121 / 396

5. Grasp lever 6c, move it to the right, and remove the jammed paper.

6. Return lever 6c to its original position.

7. Grasp lever 6d, move it to the right, and remove the jammed paper.

8. Return lever 6d to its original position.

9. Grasp handle 6 and gently push in the exit drawer assembly until it stops.

10. Rotate handle 6 in the direction of the arrow to lock the exit drawer assembly in

place.

11. Close the left and right front doors (print engine right side).

12. Follow the instructions on the UI to clear other areas or to resume your print job.

10-19

Xerox

Color 800/1000 Press

User Guide

Problem solving

Содержание Stacker 1000













































































































































































































































































































































































































Результаты поиска

Содержание Stacker 1000

Отзывы:

Xerox Stacker 1000, Руководство пользователя, Страница: 121 / 396

Результаты поиска

Содержание Stacker 1000

Отзывы: