manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 44 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 44

12. Select OK to save the information and close the Tray Properties window.

13. Run your print job.

• The paper is fed accurately without skew and the printed output is satisfactory;

you are finished.

• The paper is skewed and the printed output is unsatisfactory; proceed to the next

step.

14. Pull out the tray slowly until it stops.

15. Return the right-side skew adjustment lever toward the rear of the paper tray; this is

its default position.

16. Gently push in the tray until it comes to a stop.

17. If you are still having skew adjustment problems, refer to the Advanced Stock Setup

information located in the System Administration Guide.

Xerox

®

 Color 800/1000 Press

6-6

User Guide

Paper information

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов