Xerox Stacker 1000 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 396

Xerox Stacker 1000 Скачать руководство пользователя страница 54

4. Use the Up/Down buttons to move the stock within the Stock Library List.

5. Select Close to exit Manage Stock Library.

Copying a stock entry

Sometimes an existing stock entry (either from the RML or the Stock Library list) already
contains most of the attributes required for a new stock entry. In this case, the user
simply copies an existing stock and modifies its attributes to create a new stock entry.

1. Select Stock Library.

The Manage Stock Library window opens.

2. Select the desired stock from either the RML or the Stock Library list.

3. Select the Copy button.

The Stock Properties window opens.

4. Type a new stock name and modify the attributes as required.

5. Select the Advanced Setup button.

a) Select the various Advanced Stock Setup options as required.

b) Select OK to save any selections made and close the Advanced Stock Setup window.

6. Select OK to save and close the Stock Properties window.

The stock is added to the bottom of the Stock Library List.

7. Use the Up/Down buttons to move the stock within the Stock Library List.

8. Select Close to exit Manage Stock Library.

Xerox

®

Color 800/1000 Press

7-6

User Guide

Manage Stock Library

«
...
52
53
54
55
56
...
»

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов