manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 343 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 343

19

Standard Finisher Plus

The Standard Finisher Plus acts as a communication device and provides a paper path
between the print engine, the required Interface Module, and any third-party, Document
Finishing Architecture (DFA) device that is attached to the machine.

The Standard Finisher Plus supports a number of optional finishing devices ranging from
light-production print engines to futuristic devices that utilize other communication and
physical interfaces.

Overview

Note

The Standard Finisher Plus requires the Interface Module.

The Standard Finisher Plus is comprised of these two modules:

1. Finisher Module

2. Finishing Transport

19-1

Xerox

®

 Color 800/1000 Press

User Guide

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов