manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 32 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 32

• Color Large Impressions: This value (number) represents the total number of large

color impressions. These impressions are one side of one sheet of large media (for
example 11 x17 in./A3). Large Impressions are any prints that are larger than 8.5 x
14 in./B4 size.

-

For each large, color, one-sided printed output, the meter increases by one.

-

For each large, color, two-sided printed output, the meter increases by two.

Note

This meter/counter is NOT added to the Total Impressions meter/counter since it is
already added to the Color Impressions meter/counter.

• Black Large Impressions: This value (number) represents the total number of large,

black-only impressions. These impressions are one side of one sheet of large media
(for example 11 x17 in./A3). Large Impressions are any prints that are larger than
8.5 x 14 in./B4 size.

-

For each large, black-only, one-sided printed output, the meter increases by one.

-

For each large, black-only, two-sided printed output, the meter increases by two.

Note

This meter/counter is NOT added to the Total Impressions meter/counter since it is
already added to the Black Impressions meter/counter.

Maintenance (on the UI)

Selecting Maintenance on the UI opens a window which displays a status of each
consumable.

If logged on as Administrator, the additional  Maintenance tab is available. Refer to
the System Administration Guide for more information

Xerox

®

 Color 800/1000 Press

3-4

User Guide

Machine/job status

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов