manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 337 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 337

8. Ensure that all covers on the SquareFold Trimmer Module are closed.

9. If the SquareFold Trimmer Module Control Panel and/or the machine’s UI indicate

there is a still a jam, recheck the SquareFold Trimmer Module (steps 1-8).

10. If necessary, open the finisher to look for jams/faults along the finisher path.

11. Follow the instructions displayed on the machine UI to resume printing.

Clearing E1/E2 jams

Use the following procedure to clear jams when the E1 and/or E2 LED is lit on the
SquareFold Trimmer Module control panel.

1. Make sure that the machine is not in operation, and press the button on the left cover

of the Trimmer unit to open the cover.

2. Remove the jammed paper.

18-13

Xerox

®

 Color 800/1000 Press

User Guide

SquareFold Trimmer Module

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов