manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 335 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 335

1. This booklet has preprinted front and back covers with a full-page image. It was

printed on 8.5 x 14 in./B4 paper. The front cover, which was trimmed, displays the
entire image.

2. This same booklet was printed on 8.5 x 11 in./A4 paper. The image on the front cover

is truncated after trimming it.

Before you print any booklet job, you should consider your whole job, including the
following:

• What is the desired size of the finished booklet?
• Does the booklet contain full-page images?
• Are you using preprinted covers with full-page images?
• Are you trimming the booklet?
• Do you need to shift any full-page images in order to ensure they fit on the finished

booklet?

These are important questions which can affect the output of your booklet jobs, especially
if you are using full-page images and trimming the booklet edges.

Follow these tips

Follow these tips to ensure you get your desired output:

• Always run one or more test prints of your job before running a larger output quantity.
• Review your test prints for truncated images/text.
• If any images/text need shifting, use the various selections from your application’s

print driver; refer to your print driver’s Help information.

• Remember: it may take one or more test prints before you achieve your desired

output.

18-11

Xerox

®

 Color 800/1000 Press

User Guide

SquareFold Trimmer Module

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов