Xerox Stacker 1000 Скачать руководство пользователя страница 305

Страница: 305 / 396

Paper jams at 2c, 2e, 2f, and 2d

1. Make sure that the machine has stopped printing.

2. Open the Right Cover on the finisher.

3. Pull out the folder output tray ( 2d), swing lever 2e/2f to the right, and remove the

jammed paper.

Note

If paper is torn, check inside the machine and remove it.

4. If you cannot remove the paper, return the lever 2e/2f to its original position. Swing

the lever 2e/2f, turn the knob 2c to the right, and remove the jammed paper.

17-27

Xerox

Color 800/1000 Press

User Guide

Standard/Booklet Maker Finisher

Содержание Stacker 1000













































































































































































































































































































































































































Результаты поиска

Содержание Stacker 1000

Отзывы:

Xerox Stacker 1000, Руководство пользователя, Страница: 305 / 396

Результаты поиска

Содержание Stacker 1000

Отзывы: