manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 206 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 206

1 Compiler tray LED

This LED lights when the compiler tray cover is locked indicating that the binder is in
operation. This safety feature prevents access to the internal components.

Note

The LED also lights when the printer and Perfect Binder are powering on. Upon
completion of the power-on process, the LED switches off.

2 Compiler tray cover

Open this cover to clear jams or to add a book block (printed, finished book) for manual
mode operations.

3 Top cover

Open this cover to clear paper jams.

4 Compiler tray

This tray gathers the finished sheets into a book block, and the book block is used to
make the final finished book.

5 Cover inserter

Load paper here for covers or inserts.

6 Adhesive filling tray

Open this tray to insert adhesive pellets for the binding process.

7 and 8 Left and right front doors

Open these doors to clear paper jams or to access internal components.

9 Front doors LED

When a binding operation is in progress the LED changes to orange; this indicates that
the front doors are locked. When no binding is in process, the LED is not illuminated,
and the front doors may be opened to clear jams and to access the internal components.

Note

The LED also lights when the printer and Perfect Binder are powering on. Upon
completion of the power-on process, the LED switches off.

10 Trimmer waste tray

Excess paper trimmed from the book block sheets are stored in this tray. The tray is
easily removed to recycle the waste trimmings.

11 Book stacker tray

Finished (completed) bound books are transported to this area.

12 Book stacker tray release button and LED

Press this button to open the book stacker tray. A flashing green light indicates that
the tray is in the process of being opened or closed. A steady green light indicates that
the tray is open, and completed books may be removed.

Xerox

®

 Color 800/1000 Press

16-2

User Guide

Perfect Binder

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов