manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 75 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 75

Note

The default setting is 0. It is recommended that you leave this option at its default
setting until you run test prints and evaluate the output of the prints.

Tip

Changing the default setting should be considered a temporary solution because
environmental conditions vary from day to day. It is recommended that upon completion
of the print job, you return the option to its default setting.

Fold Adjustment Profile

This option allows you to select a desired fold adjustment profile.

Note

This option is available only if your machine has the optional Standard Finisher, Booklet
Maker Finisher, or Standard Finisher Plus attached to it.

From the Fold Adjustment Profile pull-down menu, select the desired profile, as required.
These profiles are preset profiles, which are created and maintained from the Profiles
feature on the UI.

Note

Refer to the Profiles chapter of the System Administration Guide for detailed information.

8-15

Xerox

®

 Color 800/1000 Press

User Guide

Advanced Stock Setup

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов