Xerox Stacker 1000 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 396

Xerox Stacker 1000 Скачать руководство пользователя страница 46

• Override:

-

When this selection is cleared, the UI displays a message if the current media
loaded in the tray does not match the media information displayed on the Tray
Properties window. The user must load the tray with the same media as indicated
on the Tray Properties window.

-

If selected, the UI never displays a message when there is a media mismatch
between the actual tray contents and the information shown on the UI for that
tray.

• Display Tray Properties automatically when Tray is open: When selected, the Tray

Properties window always opens when the tray is open.

• Stock Library: This opens the Manage Stock Library window, which contains the

names of all the paper stocks that were either created by the user or copied and/or
edited from the Recommended Media List (RML). The user selects a desired stock
from the list, and that stock is assigned to the tray.

• Recommended Media List (RML): Provides a list of all the default, preprogrammed

stocks that are available for the machine. The user can select a stock from the RML
to assign temporarily to the tray. Once the Tray Properties window is closed, the stock
appears name appears in blue/italics indicating that it is a temporary stock. The stock
is deleted once a different stock is selected.

• Create New Stock: Allows the user to create a new stock that is assigned to the tray.

This stock may be saved permanently to the stock library, or it can remain as a
temporary stock.

• Alignment Profile: Allows the user to select the system default profile or a specific

profile that was created and saved from the Administrator mode.

Related Topics:

Manage Stock Library

Advanced Stock Setup options

Recommended Media List (RML)

Creating a new stock (from Tray Properties)

Tray stock mismatch

If the paper loaded in a tray does not match the information on the Tray Properties
window, the UI may alert you with a

Tray Stock Size Mismatch

message.

Note

This functionality is available only if it is enabled by the Administrator: refer to the
System Administration Guide for more information.

Xerox

®

Color 800/1000 Press

6-8

User Guide

Paper information

«
...
44
45
46
47
48
...
»

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов