Xerox Stacker 1000 Скачать руководство пользователя страница 197

Страница: 197 / 396

3. Lift the green handle(s) and/or rotate the green knob and remove all paper in the

entrance area.

4. Close the green handle(s).

5. Close the HCS Front Cover.

6. If the UI indicates there is a jam in the print engine, follow the instructions on the

screen to remove any paper in the area indicates.

7. Follow the instructions displayed on the UI to resume printing.

HCS exit jam (E8)

Perform the following steps to clear the jam and resume printing:

1. Open the HCS Front Cover.

15-9

Xerox

Color 800/1000 Press

User Guide

High Capacity Stacker (HCS)

Содержание Stacker 1000













































































































































































































































































































































































































Результаты поиска

Содержание Stacker 1000

Отзывы:

Xerox Stacker 1000, Руководство пользователя, Страница: 197 / 396

Результаты поиска

Содержание Stacker 1000

Отзывы: