Xerox Stacker 1000, Руководство пользователя, Страница: 108 / 396

Suggested solutions Problem
Output jams when exiting
the machine to the Offset
Catch Tray
• When no other output device is present, the Offset Catch Tray
can hold up to 500 sheets of 24 pound (90 g/m
2
) paper. Empty
the catch tray when output approaches this limit to ensure
continuous production.
• Ensure the first sheet is not blocking the paper exit, particularly
for 11 x 17 inch (A3) output.
Paper curl may be a result of: Excessive paper curl
• Ensure that the correct paper weight and paper type are
selected.
• The mass of dry ink (toner) coverage on the print output - the
greater the dry ink/toner mass, the greater the paper curl.
• The paper weight and whether or not it is coated or uncoated.
• The humidity conditions at the machine.
• You can sometimes minimize curl problems by flipping the
paper over in the tray and making the copies again. If excessive
curl is still present, use a heavier paper.
• To ensure continuous production, empty the output device
when the output approaches the maximum amount that the
device can hold; refer to the specifications for that output device
for output limit amount.
• An attempt to print on thicker paper or on paper stock that is
less sensitive to moisture.
Paper curl can be adjusted in the following ways:
• When logged in as the System Administrator by using the
Advanced Stock Setup feature (Paper Curl Correction option);
refer to the System Administration Guide for more information.
• If you have the optional Interface Module (IM) attached, you
can use the manual decurl buttons on the IM’s control panel.
Refer to the section later in this guide called Interface Module
(IM).
• If you have the optional Standard/Booklet Maker Finisher
attached, you can use the manual decurl buttons on the finisher.
Refer to the section later in this guide called Standard/Booklet
Maker Finisher.
This occurs when an error to the LogHarvest Plus tool occurs. The
LogHarvest Plus tool is shown as a house icon on the bottom right
side of the UI screen.
To resolve this error, select Programs > Startup > LogHarvest
Plus. Software Tool Fault
message: A software tool
that is running on the
System Computer did
respond properly.
Xerox
®
Color 800/1000 Press
10-6
User Guide
Problem solving
(continued)