manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 378 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 378

7. Follow the instructions on the UI to restart your print job.

Paper jams in area 4

Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs. If paper is torn, check inside the Finishing
Transport and remove it.

1. Open the Finishing Transport front door.

2. Grasp the green handle  4 and gently pull toward the right.

3. Remove the jammed paper.

4. Check for and remove any jammed paper between the exit from the Finishing

Transport and the entrance to the attached third-party device.

5. Return the green handle  4 to its original position.

6. Close the Finishing Transport front door.

7. Ensure that the paper jam indication is cleared from the Finishing Transport status

display.

Xerox

®

 Color 800/1000 Press

19-36

User Guide

Standard Finisher Plus

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов