manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 231 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 231

• Do not use adhesive pellets that have fallen on the floor as they may contain dirt

and dust which may cause binder malfunctions.

• Do not place anything other than the adhesive pellets into the adhesive replenishment

hopper as this may cause a fire in the binder.

• The adhesive pellets are transferred to the binder as the supply in the binder is

consumed. The binder can contain about 0.8 pounds (380 grams) of adhesive.

Replenishing the adhesive filling tray

1. Open the adhesive filling tray.

2. Open the outer cover.

3. Open the inner cover.

4. Using the supplied scoop, add adhesive pellets to the replenishment hopper until the

height of the pellets is even and level and just below the adhesive limit line.

5. Close the inner and outer covers.

6. Close the adhesive filling tray; an audible click is heard when the tray locks into

position.

Binder problem solving

Note

• Paper jams are displayed on both the printer’s UI and the binder’s control panel.
• Clear multiple paper jams in the sequence indicated on the printer’s UI and on the

binder’s control panel.

16-27

Xerox

®

 Color 800/1000 Press

User Guide

Perfect Binder

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов