Xerox Stacker 1000 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 396

Xerox Stacker 1000 Скачать руководство пользователя страница 31

Select the Usage Counters tab.

a)

b) Select Reset All.

A screen displays the following message: Are you sure you want to reset all the
usage counters to zero?

c) Select Yes to reset the counters; select No to exit and return to the meters/counters.

4. Select Close to exit the meters/counters and return to the main UI.

Billing and counters information

• The Billing Meters tab displays the total number of prints for both black and white

and color output. The information displayed may vary from market place to market
place.

Note

These meters CANNOT be reset.

• The Usage Counter tab works the same way as a trip odometer in a car. It can be

reset to zero. Once it is reset to zero, it keeps track of the print count from that point
forward until you select the Reset All button.

Note

If the optional clear dry ink/toner is present, the Usage Counters tab displays two
additional print counters: Clear Impressions and Clear Large Impressions.

Note

The information displayed on this screen may vary from market place to market place.

Impressions information

The meter and counters display the total impression amount. An impression is the image
on one side of one sheet of media. The meters and counters display the total impression
amount for all printed jobs. The impression information is separated into the following
categories:

• Color Impressions: This value (number) represents the total number of color

impressions regardless of the media size.

-

For each color, one-sided printed output, the meter increases by one.

-

For each color, two-sided printed output, the meter increases by two.

• Black Impressions: This value (number) represents the total number of black-only

impressions regardless of the media size.

-

For each black-only, one-sided printed output, the meter increases by one.

-

For each black-only, two-sided printed output, the meter increases by two.

• Total Impressions: This value (number) represents the total number of ALL impressions

regardless of size or color. It is the sum of the Color Impressions and the Black
Impressions combined.

3-3

Xerox

®

Color 800/1000 Press

User Guide

Machine/job status

«
...
29
30
31
32
33
...
»

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов