Xerox Stacker 1000 Скачать руководство пользователя страница 195

Страница: 195 / 396

2. Lift the green handle(s) and/or rotate the green knob and remove all paper in the

entrance area.

3. Close the green handle(s).

4. Close the HCS Front Cover.

5. Press the Unload button on the HCS control panel.

Wait until the Unload indicator lights and then open the HCS front door.

6. Open the front door after the Unload indicator lights.

7. Pull out the stacker cart and gently remove the jammed paper.

8. Push the stacker cart straight into the HCS.

9. Close the front door.

15-7

Xerox

Color 800/1000 Press

User Guide

High Capacity Stacker (HCS)

Содержание Stacker 1000













































































































































































































































































































































































































Результаты поиска

Содержание Stacker 1000

Отзывы:

Xerox Stacker 1000, Руководство пользователя, Страница: 195 / 396

Результаты поиска

Содержание Stacker 1000

Отзывы: