manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 109 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 109

Related Topics:

Power on/off the machine

Locating the machine serial number

System menu

Cleaning procedures

Replacing consumable supplies

Jam clearance

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.

Related Topics:

Fault codes

Paper jams in Trays 1 and 2

Paper jams in area 2

Paper jams in areas 3 and 4

Paper jams in area 5

Paper jams in area 6

Paper jams in area 7

Paper jams in Trays 1 and 2

1. Pull out the tray slowly until it stops.

2. Remove jammed paper.

Note

If paper is torn, check inside the machine and remove it.

3. Gently push in the tray until it comes to a stop.

10-7

Xerox

®

 Color 800/1000 Press

User Guide

Problem solving

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов