manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 334 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 334

Accessing the Trimmer options

For network print jobs, the Trimmer feature and its related options can be accessed
either from your computer’s print driver (before the job is submitted for printing or at
the print server (after the job is submitted for printing). To access the Trimmer
feature/options for network print jobs, perform the following:

1. For jobs being sent from your computer, continue to the next step.

• For jobs already at the print server, continue to Step 3.

2. From your computer, open the desired job in its appropriate application (for example,

Microsoft Word or Adobe Reader).

a) Select File and Print.

b) From the Print window, select the desired machine (with the SquareFold Trimmer

Module attached to it), and then select Properties for that machine.

c) Continue to Step 4.

3. From the print server, if applicable, open the Properties of the desired job:

a) Double click on the job (from either the Hold or Printed Jobs queues).

b) From the Properties window, go to the Finishing/Output tab.

c) Continue to the next step.

4. Ensure that the correct output tray is selected (Booklet Maker Tray).

5. If necessary, ensure that the correct Stapling/Finishing/Folding features are selected.

6. Select the desired Trimmer option.

7. Select OK to save selections and close any Properties windows.

8. Send the the job to the machine.

Hints and tips

Printing full-page images on booklets

When using full-page images, ensure that the finished booklet size accommodates any
full-page images, and that when the booklet is trimmed, these images are not truncated.
Refer to the illustration.

Xerox

®

 Color 800/1000 Press

18-10

User Guide

SquareFold Trimmer Module

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов