manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 208 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 208

Internal components

1 Cover transport

This moves the cover sheets from the cover inserter to the binding area.

2 Bypass transport

This transport moves the cover media to the binding area; the cover media may come
either from the cover inserter tray or from the printer (network print job). If book binding
is not required, the printed output is transferred from the incoming paper path (from
the left of the Perfect Binder) directly through the binder and to the next finishing
device in line.

3 Adhesive unit

Applies adhesive to the book block in order to bind the spine of the pages together.

4 Binding area

This area binds book block to the cover material.

5 Cutter area

This area is where the book block pages are cut/trimmed. Finished books then are
transported to the book stacker tray.

Xerox

®

 Color 800/1000 Press

16-4

User Guide

Perfect Binder

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов