manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 341 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 341

Recommended solution

Possible cause

Fault
code

Jam or communication error with
the SquareFold Trimmer Module

013-221
013-222

013-223

013-224

013-225

013-226

013-227

013-228

013-229

013-230

013-231

013-232

013-233

013-234

013-235

013-236

013-237

013-238

013-239

013-240

013-241

013-242

013-243

013-246

1.

Power off/on the machine.

2.

If fault persists, call for service.

A top cover is open.

013-303

013-304

1.

Open the Top Left and Right Covers of the
SquareFold Trimmer Module.

2.

Close the SquareFold Trimmer Module Top
Left and Right Covers.

3.

If fault persists, power off/on the machine.

4.

If fault persists, call for service.

The Trimmer Waste Container is full
or has a fault.

013-208

013-940

013-941

1.

Pull open the container and empty any
trimmer scraps from it.

2.

Reinsert the container into the SquareFold
Trimmer Module.

3.

Ensure that the container is fully pushed
in, and that the indicator light is not lit.

4.

If fault persists, repeat Steps 1-3.

5.

If fault persists, power off/on the machine.

6.

If fault persists, call for service.

18-17

Xerox

®

 Color 800/1000 Press

User Guide

SquareFold Trimmer Module

(continued)

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов