manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 285 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 285

3. Load the paper/tabs, aligning it to the front side of the tray.

a) If the paper is preprinted, load the paper with the printed side facing up.

b) If the media is tab stock, load the tab side to be fed first (in the direction of the

arrow as shown in the above illustration).

4. From the Tray Properties window, enter the correct paper information, including size,

type, weight, and if necessary, decurler and/or alignment option

If enabled by your System Administrator, the Paper Tray Properties screen may be
displayed on the UI.

5. Select OK to save the information and close the Tray Properties window.

Maintenance

Standard/Booklet Maker consumable supplies

Xerox supplies, including staples, staple cartridges, and staple waste containers can be
ordered from Xerox by going to 

www.xerox.com

 and clicking on either the Contact Us

link for specific contact information/telephone numbers in your area or by clicking on
the Supplies and entering/selecting your specific machine information (product family
and model type).

Note

Always refer to 

www.xerox.com

 for the latest Consumable Replaceable Units (CRUs)

part numbers.

Store supply items and Xerox parts in their original packages in a convenient location.

Supply Unit Shipped with finisher/Reorder Quantity

Supply Item

4 staple cartridges (5000 staples per cartridge) and 1
staple waste container per carton

Staple cartridge/staple waste
container

4 pack: 5000 staple refills each

Booklet Maker Finisher staple cartridge

17-7

Xerox

®

 Color 800/1000 Press

User Guide

Standard/Booklet Maker Finisher

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов