manualshive.com logo in svg

Xerox Stacker 1000, Руководство пользователя, Страница: 104 / 396

Поделиться
Скачать
Xerox Stacker 1000 Скачать руководство пользователя страница 104

Use the following procedure to find the serial number on the machine.

1. Open the left front door (print engine left side).

2. Locate the machine serial number frame on the lower left side.

3. Close the left front door (print engine left side).

Calling for service

1. Record any displayed fault codes.

2. Record the machine serial number by selecting  System  > Machine Details . (If the

serial number is not displayed, open the right/left front doors on the print engine left
side. The serial number is on a white label on the machine’s frame.

3. If output quality is a problem, take a sample as a reference to assist you in describing

the problem over the telephone when answering the questions from the customer
support operator about the defects.

4. If possible, use a phone near the machine when calling for assistance. Follow the

instructions provided by the operator.

5. For system support, user help, and service support, call the appropriate number. For

the specific number in your area, go to www.xerox.com and select the Support link.

Related Topics:

Locating the machine serial number

Xerox

®

 Color 800/1000 Press

10-2

User Guide

Problem solving

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов