Xerox Stacker 1000 Скачать руководство пользователя страница 153 | Manualshive

Страница: 153 / 396

Xerox Stacker 1000 Скачать руководство пользователя страница 153

11

Technical data

Machine specifications

Tray capacity

Paper trays 1 and 2 are identical and each tray has a capacity of holding 2,000 sheets.
The trays accommodate the following:

• Paper weights between 15 lb. Bond to 130 lb. Cover (55 gsm to 350 gsm)
• Paper sizes starting at 7.2 x 7.2 in. (182 x 182 mm) to a maximum of 13 x 19.2 in.

(330 x 488 mm)

• If using the optional Postcard bracket, minimum size is 101.64 x 152.4 mm (4 x 6

inches)

Note

For more information on the optional Postcard bracket, refer to the Oversized High
Capacity (OHCF) section of this guide and the Customer Support Center.

• All stock types including transparencies, labels, letterhead, coated and uncoated,

drilled, and carbonless

• Long Edge Feed (LEF)/portrait or Short Edge Feed (SEF)/landscape loading of paper

(dependent on the actual paper size)

The trays also:

• Have auto size detection capability; the loaded paper size, weight, type, and

orientation is displayed on the UI screen once the tray is closed.

• Automatically adjust the tray position in the front and back based on the paper size;

this is done once the tray is closed.

Note

For tray capacity information on the optional Oversized High Capacity Feeder (OHCF),
refer to the appropriate section later in this guide.

Throughput information for all paper trays

• Type: Coated or uncoated paper, transparencies, labels, transfer paper, tabbed inserts,

drilled (LEF), carbonless paper

11-1

Xerox

®

Color 800/1000 Press

User Guide

«
...
151
152
153
154
155
...
»

Содержание Stacker 1000













































































































































































































































































































































































































Отзывы:

Нет отзывов