Woodward MRM4, Руководство пользователя

Страница: 58 / 460

Input, Output and LED Settings
Input, Output and LED Settings
Configuration of the Digital Inputs
Based on the »assignment list«, the states of digital inputs are allocated to
the module inputs.
Set the following parameters for each of the digital inputs:
•
»Nominal voltage«;
•
»Debouncing time« : A state change will only be adopted by the digital input after the debouncing time
has expired; and
•
»Inverting« (where necessary).
The debouncing time will be started each time the state of the input signal
alternates.
In addition to the debouncing time that can be set via software, there is
always a hardware debouncing time (approx 12 ms) that cannot be turned
of.
DI-8P X
DI Slot X1
Device Parameters of the Digital Inputs on DI-8P X
Parameter Description Setting range Default Menu path
Nom voltage Nominal voltage of the
digital inputs 24 V DC,
48 V DC,
60 V DC,
110 V DC,
230 V DC,
110 V AC,
230 V AC
24 V DC [Device Para
/Digital Inputs
/DI Slot X1
/Group 1]
Page 58 EN MRM4 01/11
=1
State of the digital input
Inverting
Input Signal
Nom voltage
0 t
Debouncing time
DI Slot X.DI x