Woodward MRM4, Руководство пользователя

Страница: 94 / 460

Input, Output and LED Settings
Parameter Description Setting range Default Menu path
Inverting 6 Inverting of the state of
the assigned signal. inactive,
active
inactive [Device Para
/Binary Outputs
/OR-3AI X2
/BO 3]
Assignment 7 Assignment 1..n, Assignment List -.- [Device Para
/Binary Outputs
/OR-3AI X2
/BO 3]
Inverting 7 Inverting of the state of
the assigned signal. inactive,
active
inactive [Device Para
/Binary Outputs
/OR-3AI X2
/BO 3]
DISARMED Ctrl Enables and disables the
disarming of the relay
outputs. This is the first
step of a two step
process, to inhibit the
operation or the relay
outputs. Please refer to
"DISARMED" for the
second step. inactive,
active
inactive [Service
/Test
/DISARMED
/OR-3AI X2]
Disarm Mode CAUTION!RELAYS
DISARMED in order to
safely perform
maintenance while
eliminating the risk of
taking an entire process
off-line. (Note: The
Supervision Contact
cannot be disarmed).
YOU MUST ENSURE
that the relays are
ARMED AGAIN after
maintenance. permanent,
Timeout
permanent [Service
/Test
/DISARMED
/OR-3AI X2]
t-Timeout DISARM The relays will be armed
again after expiring of
this time.
Only available if: Mode =
Timeout DISARM
0.00 - 300.00s 0.03s [Service
/Test
/DISARMED
/OR-3AI X2]
Page 94 EN MRM4 01/11